Step 4: Using The Configuration Utility - Buffalo HD-H120LAN Quick Setup Manual

Step 4: Using the Configuration Utility

This part of the program changes
LinkStation's IP Address. Check the
box that states
Automatically'. This will give
LinkStation an IP Address from the
network's router/DHCP server. A static
IP Address and gateway can also be
set if preferred. The
Password' field sets an administrator
password for the web-based configuration. If a password is desired,
then type a password in the field. When finished, press the 'OK'
button. LinkStation will confirm and set the IP Address settings.
These are LinkStation's main
configuration menus. Please
bookmark this page so it
can be accessed for future
configuration changes.
Refer to the User Manual for
detailed explanations of each
menu and their settings. The
User Manual is located on the
LinkNavigaor CD-ROM.
To continue setup, click on the
'Basic' settings button. This
will allow you to setup some
important settings.
Then click on the
'Acquire IP Address
'Administrator
'LinkStation Name
The login prompt will appear.
The user name is
There is NO password by
If a password was specified on the
previous step, then type that password
in the 'Password' field. Press the 'OK'
button when finished.
Setup' link.
5
root.
default.