Summary of Contents for Buffalo TeraStation HD-HTGL/R5 Series
Page 1
Main unit (TeraStation) Ethernet Cable Power Cord TeraNavigator Installation CD Quick Setup Guide (this user’s guide) Warranty card If any items are missing or damaged, please contact the reseller or retailer from which the product was purchased. www.buffalo-technology.com PY00-30050-DM20-02 2-01...
TeraNavigator Setup The setup of Link Navigator is performed using the following steps: Insert the TeraNavigator CD into the PC’s CD- ROM drive. Depending on the PC’s confi guration, the EasySetup program may launch. If it does not automatically launch, manually launch it by pressing the ‘Start’...
Page 3
TeraNavigator Setup Plug TeraStation’s power cord into a power socket. Then, connect the included Ethernet Cable into the Ethernet port on the back of TeraStation. Switch the power switch on the rear panel to the ‘ON’ position. Press the power button on the front of the TeraStation to turn it...
Page 4
Follow these setup instructions. Choose “Initial setup” from setup mode selection. ◗ Disk drive structure ◗ There are four methods to configure disk drive structure. Select preferred method. Normal mode Select this mode to use four 250GB hard drives individually. Spanning mode Select this mode to combine four 250GB hard drives as a one 1TB hard drive.
Page 5
Operate following steps referring setup instruction. The factory default settings are shown as below. ◗ Hard drive structure mode: RAID5 mode (750GB) IP address: Obtained from DHCP server TeraStation name: HD-HTGL*** (*** depends on unit) Administrator password: password Click “Finish” button when “Setup complete” is displayed. Network drive icon appears in “My Computer”.
Technical Support Buffalo Technology offers Technical Support between the hours of 9am-6pm (GMT) Monday to Thursday and 9am-4:30pm (GMT) Friday for this product. Customers in Europe can obtain Technical Support using the following...