Buffalo AirStation WZR-RS-G54 Network Service List page 5

Remote Control - TightVNC
Once you click on the 'VNC Remote' link you will be prompted for a pass-
word. If a password was not set during the installation, then this step may
not occur. Enter the password and press the 'OK' button.
It is recommended to change the remote PC's desktop size to 800x600 for the
best viewing experience. This change can be made after connecting to the
remote PC by right clicking on the desktop, selecting properties, and pressing
on the 'Settings' tab.
Once logged on, you will have full, complete control over the PC in ques-
tion. On the top bar there are a series of buttons that perform various
tasks:
Disconnect: Ends the TightVNC remote control session immediately.
Options: Brings up the options menu (see below).
Clipboard: Brings up the remote PC's clipboard so you can copy/paste
into the connecting machine.
Send Ctrl-Alt-Delete: Sends an Alt-Ctrl-Del signal to the remote com-
puter
Refresh: Refreshes what is on the screen
There are several options for TightVNC. It is recommended to leave them
all at their default values. However, the following settings may be changed
if desired:
JPEG Image Quality: Lower number = faster connection; lower image
quality. Higher number = slower connection; better image quality.
View Only: If enabled, you can only see what happens on the screen, not
interact with the desktop.
5