Brother BAS-416 User Manual page 6

Greasing
Presser Foot Assembly
1. Color change the machine to needle number 1.
Apply black grease (BR2) to the grooves of the
presser foot guide plate for the guide bracket and
retracting lever as indicated by the arrows.
B A S -
B
A S -
B E - 9 0
B E - 9 0
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER
Email:
Website: http://www.brother-usa.com/industembroidery/tech_down.aspx
6 Month Maintenance
9/1/05
4 1 6 , 4 1 6 A
4 1 6 , 4 1 6 A
1 , 9 1 6 , 1 2 0
1 , 9 1 6 , 1 2 0
tsupport@brother.com
X sensor eccentric bushing
1. Remove the 8 screws holding on the cover and
remove.
2. Lubricate eccentric bushing with a few drops of oil
to the slot as indicated by the arrow.
3. Install the cover.
Note: Make sure that the wires that run up to the
control panel through the right had side of the cover are
installed into the notch for them in the cover and not
pinched by the cover.
6
, 1 2 1 0
, 1 2 1 0
1 , 1 2 1 6
1 , 1 2 1 6
Oiling