Network Menu - Brother MFC-J220 Basic User's Manual

Network menu

(MFC-J265W and MFC-J410W only)
Level1 Level2
Network TCP/IP
Setup Wizard
WPS/AOSS
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.
80
Level3 Options
BOOT Method Auto*
Static
RARP
BOOTP
DHCP
[000-255].
IP Address
[000-255].
[000-255].
[000-255]
[000-255].
Subnet Mask
[000-255].
[000-255].
[000-255]
[000-255].
Gateway
[000-255].
[000-255].
[000-255]
Node Name BRWXXXXXXXXXXXX
WINS Config Auto*
Static
WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
APIPA On*
Off
— —
— —
Descriptions
Chooses the BOOT
method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway
address.
Enter the Node name.
Chooses the WINS
configuration mode.
Specifies the IP address of
the primary or secondary
server.
Specifies the IP address of
the primary or secondary
server.
Automatically allocates the
IP address from the link-
local address range.
You can manually
configure your print server
for a wireless network.
You can easily configure
your wireless network
settings using the one-
button push method.