Brother MFC-J220 Basic User's Manual page 46

Chapter 6
Before you choose the ring pattern to
register
You can only register one Distinctive Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.
Ring Rings
Pattern
1 long-long
2 short-long-short
3 short-short-long
4 very long
(normal pattern)
Note
Ring Pattern #1 is often called Short-Short
and is the most commonly used.
If the ring pattern you received is not on
this chart, please call your telephone
company and ask for one that is
shown.
 The machine will only answer calls to its
registered number.
 The first two rings are silent on the
machine. This is because the fax must
"listen" to the ring pattern (to compare it to
the pattern that was "registered"). (Other
telephones on the same line will ring.)
 If you program the machine properly, it will
recognize the registered ring pattern of the
"fax number" within 2 ring patterns and
then answer with a fax tone. When the
"voice number" is called, the machine will
not answer.
32
Registering the Distinctive Ring
pattern
6
Very Important !
After you have set the Distinctive Ring feature
to On, your Distinctive Ring number will
receive faxes automatically. The receive
mode is automatically set to Manual and you
cannot change it to another receive mode
while Distinctive Ring is set to On. This
ensures the Brother machine will only answer
the Distinctive Ring number and not interfere
when your main telephone number is called.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Miscellaneous.
Press OK.
d
Press a or b to choose Distinctive.
Press OK.
e
Press a or b to choose Set.
Press OK.
f
Press a or b to choose the stored ring
pattern you want to use.
Press OK.
(You hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
g
Press Stop/Exit.
Distinctive Ring is now set to On.
6