Receiving Faxes; Sending Faxes - Brother FAX-2480C User Manual

Receiving Faxes

Difficulty
Cannot receive a fax

Sending Faxes

Difficulty
Cannot send a fax
Transmission Verification Report
says 'Result:NG' or
'Result:ERROR'.
Poor fax send quality.
Vertical black lines when sending.
Suggestions
Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup. (See
Receive modes on page 35.)
If you often have interference on the phone line, try changing the menu setting of
Compatibility to Basic. (See Phone line interference on page 104.)
Suggestions
Check all line cord connections.
Make sure that the Fax
page 28.)
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See Reports
on page 69.)
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get 'Result:NG' on the Transmission
Verification Report, your machine may be out of memory. If the problem continues,
ask the telephone company to check your phone line.
If you often get transmission errors due to possible interference on the phone line,
try changing the menu setting of Compatibility to Basic. (See Phone line
interference on page 104.)
Try changing your resolution to Fine or S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See Cleaning the scanner on page 107.)
If the copy you made shows the same problem, clean the scanner. (See Cleaning
the scanner on page 107.)
Troubleshooting and Routine Maintenance
key is illuminated. (See Entering Fax mode on
95