Related Manuals for Hammerhead 500 Series
Summary of Contents for Hammerhead 500 Series
- Page 1 500 SERIES HAMMERHEAD CLEANING EQUIPMENT COMPANY Adjustment & Testing Guide ENGINEERED SIMPLICITY Easy to Use Efficient Economical HammerheadClean.com...
- Page 2 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 1 of 25 READ THE USE AND MAINTENANCE MANUAL Display function The display allows to: setup and manage the main functionalities and commands of the machine during the •...
- Page 3 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 2 of 25 Display function – Alarm Table The display shows the possible alarms of the machine. Alarms are shown on the first line of the display and it alternates between the alarm id and a short alarm description.
- Page 4 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 3 of 25 Steering wheel function – Alarm Table (following) Allarm id. Alarm Description What to do AL_18: Traction Traction Current High current consumption detected. Check Tract.
- Page 5 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 4 of 25 Display function – Working Mode – Battery Status During the working mode the display shows battery charge status (as percentage of the total available charge).
- Page 6 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 5 of 25 Display function – “user menu” and “advanced menu” (following) Available sections of “user menu” are: AVAILABLE MENU DEFAULT DESCRIPTION VALUES General Sets: IT –...
- Page 7 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 6 of 25 Steering wheel function – “user menu” and “advanced menu” (next) To modify a parameter value, act as follow: • Scroll and move inside the submenu, using the “key 1” and the “key 3”, until finding the parameter to modify.
- Page 8 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 7 of 25 Display function – “user menu” and “advanced menu” (next) “Advanced menu”. To get access to the “advanced menu” enter as first the “user menu” and then the submenu “password”.
- Page 9 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 8 of 25 Display function – “advanced menu” - submenu “General Sets” The “General sets” submenu allows to enter the machine general parameters. “General sets” is very similar to “user menu”.
- Page 10 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 9 of 25 Display function – “advanced menu” - submenu “Brushes Sets” The “Brushes sets” submenu allows to enter the parameters and settings related to brush motor. Brushes Sets: default Maximum...
- Page 11 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 10 of 25 Display function – “advanced menu” - submenu “Water Pumps Sets” The “Water pumps sets” submenu allows to enter the parameters and settings of the water pump and detergent pump (if installed).
- Page 12 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 11 of 25 Display function – “advanced menu” - submenu “Chemical Pumps Sets” (next) Chemical Pumps Sets: default Maximum number pulsation minute of the chemical pump. MaxPumpFreq:#.#[puls/min] Chemical Pumps Sets: default...
- Page 13 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 12 of 25 Display function – “advanced menu” - submenu “Vacuum Sets” The “Vacuum sets” submenu allows to enter the parameters and settings related to vacuum motor.
- Page 14 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 13 of 25 Display function – “advanced menu” - submenu “Traction Sets” The “Traction sets” submenu allows to enter the parameters and settings related to traction motor.
- Page 15 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 14 of 25 Display function – “advanced menu” - submenu “Traction Sets” (next) Traction Sets: default Dead band of the potentiometer. Deadband ref value: ##[mV] Traction Sets: default Electronic brake delay at the switching...
- Page 16 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 15 of 25 Display function – “advanced menu” - submenu “Monitor mode” The “Monitor mode” submenu shows the parameters and settings of the machine during the working condition.
- Page 17 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 16 of 25 Display function – “advanced menu” - submenu “Monitor mode” The mentioned parameters can be displayed also in working mode. Follow the procedure here described: Switch off the machine by switching the key in OFF position.
- Page 18 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 17 of 25 Electric System Testing 1. Disconnect the battery connector. 2. Check cle anliness and tightness of the battery connection cables. 3. Check the connection and tightness of the power cables. 4.
- Page 19 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 18 of 25 Battery charger adjustment (NORDELETTRONICA) 1. Check that the set- up of the battery charger corresponds to the type of battery actually installed on the machine. 2.
- Page 20 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 19 of 25 Hydraulic installation 1. Check the cleanliness and functionality of the solution tank plug fast water-detergent filling cap. 2. Check the cleanliness and sealing of the solution filter.
- Page 21 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 20 of 25 Vacuum adjustment 1. Check cleanliness and functionality of the floating filter. 2. Unscrew the of the floating filter and check the right positioning of the vacuum filter, cleaning it if necessary.
- Page 22 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 21 of 25 Suction microswitch adjustment: adjust the microswitch so that when the lever is turned, • the switch closes (thereby activating the suction). Once find the correct regulation fix the microswith with •...
- Page 23 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 22 of 25 Brush base adjustment (BT version) 1. Base horizontal tilt adjustment. • Position the machine on an even and level floor • Mount the brush and lower the base to the floor. •...
- Page 24 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 23 of 25 Adjusting the Washing Base (BTS version) 1. Adjust the transversal inclination of the base: position the machine on an even, flat floor •...
- Page 25 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 24 of 25 Adjusting the squeegee 1. The rubbers must have an angle between 30° and 45° relative to the floor and uniform along the entire length of the squeegee.
- Page 26 Doc. 10059284 ADJUSTMENTS Issued 12/2016 ANTEA 50 BT – BTS - BTO Ver. TESTING Page 25 of 25 Testing machine operation Check the functioning of the switches. Check the functioning of the speed regulator. Check the functioning of the base. Check the functioning of the brush motor.
- Page 27 ENGINEERED SIMPLICITY CONTACT US info@hammerheadclean.com HammerheadClean.com...