Configuring Alarm Relay Inputs - Bosch UML-172 Installation Manual

High Performance LCD Monitors
NOTICE! When key lock is enabled through the front panel, use
either the remote control or the front panel buttons to disable
i
the key lock command. To disable the key lock feature using the
front panel buttons, press and hold both the Input and the
Menu buttons until the monitor displays the Key Unlocked
message.
5.7.1

Configuring Alarm Relay Inputs

The monitor allows you to connect an alarm relay cable from a
device (camera or door) to the monitor, and then to configure
the monitor's response to an incoming alarm (see
Section 4.7 Connecting an Alarm Trigger, Page 25).
Trigger
Table 5.7 Trigger Menu
Option Definition
Trigger Enable Activates the trigger feature.
Trigger Type Specifies the source of the alarm. This option is
always set to External.
Bosch Security Systems, Inc.
Trigger Enable
Trigger Type
Trigger Input
Buzzer
Trigger Time
Trigger Option
Display Type
:Move :Input
Installation Manual
Navigating the Monitor | en
Off
External
AV1
On
20
N/O
PIP & FULL
:Menu
Selections
ON or OFF
External
F.01U.076.723 | 3.0 | 2009.03
37