Pip Menu - Bosch UML-172 Installation Manual

High Performance LCD Monitors
5.6

PIP Menu

To access the PIP menu, press the Menu button on the front
panel of the monitor, then press the left and right arrows to
select the PIP icon. Press the up and down arrows to select the
PIP submenu.
PIP
Table 5.5 PIP menu
Submenu Definition
PIP Activates the PIP feature.
Input Source Select the video input source for the PIP area. The selections depend on
the main video input source. Analog video sources (AV1, AV2, S-Video)
can display only digital video (Component, HDMI, DVI, PC) inputs in the
PIP area; digital video sources can only display analog video inputs in the
PIP area.
AV1, AV2, S-Video: Component, HDMI, DVI, PC
Component, HDMI, DVI, PC: AV1, AV2, S-Video
Size Enables 3 screen sizes: full screen side by side, 4:3 side by side, and 4:3
corner (177 mm [3.03 in.] diagonal).
Position Enables 4 positions: bottom right, top right, bottom left, top left.
Swap Alternates between the main and sub picture for the PIP mode.
Continuously press to change selection.
Sound Select Select the sound source from either the Main or the PIP input source
(only available when PIP is enabled)
Bosch Security Systems, Inc.
PIP
Input Source
Size
Position
Swap
Sound Select Main
:Move :Input
Installation Manual
Navigating the Monitor | en
On
AV1
:Menu
.
F.01U.076.723 | 3.0 | 2009.03
35