Form Assist Module - Canon Oce VarioPrint 6000+ Series Operation Manual

Form Assist Module

Form Assist Module
Introduction
The printer allows you to print on special media with irregular thickness. Examples of such media
are media with glued-on (membership or bank) passes, folded media, or media with a slip
attached. When you load a stack of special media with irregular thickness into the paper tray, the
stack will tilt. When the stack tilts too much, it may cause paper jams. Therefore, you can only
load a limited amount of special media with irregular thickness into the paper tray.
The Form Assist Module is a device you can insert in your paper tray without modifying your
paper tray. It allows you to increase the media input capacity. When you use the Form Assist
Module, your stack of special media will stay straight. This allows you to load more media into
the paper tray and to increase your productivity. The Form Assist Module is delivered with
'Installation instructions'.
IMPORTANT
The variety of special media makes it difficult to predict whether the printer can process the
special media you want to use. Before you begin, test the special media and print a limited
number of sheets.
Paper input capacity
Paper with irregu-
lar thickness (num-
ber of sheets)
Paper tray with Form Assist Module Paper tray without Form Assist
100 - 200
Module
20 - 50
Chapter 10 - Optional finishers and other devices
Form Assist Module
183