Output Recovery In Case Of An Error - Canon Oce VarioPrint 6000+ Series Operation Manual

Output recovery in case of an error

Introduction
The Océ VarioPrint® 6000
an error. By factory default, the output recovery is set to [Normal]. After the error is solved, the
job continues at the page where the error occurred automatically.
However, some printing environments require that multiple copies must be avoided. For
example, in transactions involving the printing of valuable documents such as cheques. In such
an environment, the [Output recovery] setting of your IPDS setup must be set to [Suppressed].
When the output recovery is suppressed, the printer will not automatically recover output. All
pending pages in the printer will be deleted and the stack will be ejected. The host system and
the operator are responsible for the recovery. The operator must restart the job manually on the
correct page.
The tables below describe what happens when either the normal output recovery or the
suppressed output recovery is selected.
Normal output recovery in IPDS
Job
+
Line is equipped with an efficient, reliable output recovery in case of
Job progress states
Sheets printed suc-
cessfully.
Sheets copied to con-
troller memory (in-
cluding error pages).
Output recovery in case of an error
Normal output recov‐
ery
Are stacked at one of
the output locations.
Remain in controller
memory.
Chapter 7 - Carry out print jobs
End up in the output
location after error re‐
covery
Sheets are in output
location
Once the error is re-
solved, the printer re-
starts by printing the
first page in the con-
troller memory.
149
4