Makita DML813 Instruction Manual page 9

For DML814 only
The lighting area can be adjusted by turning the individual lamp units.
180°
► 1. Lamp unit
NOTE: If the grip force of the light head or lamp unit
is decline, tighten the screws. (Refer to the section for
screw tightening.)
Screw tightening
CAUTION:
Before tightening the screws, retract the
poles all the way or lay the appliance sideways. Otherwise
the light head moves accidentally and cause an injury.
NOTICE:
Do not over tighten the screw.
Otherwise the joint parts may be broken.
NOTICE:
Do not use electric tools to tighten the
screw. Otherwise the screw may get over tightened.
If the grip force of some joint parts is declined, tighten
the screw shown in the figure.
For the extension latches
► 1. Screw
1
1
1
For the light head
1
► 1. Screw
For the individual lamp units (DML814 only)
1
1
► 1. Screw
Shoulder belt
Optional accessory
CAUTION:
When carrying the appliance, keep
holding the carrying handle even if when using the
shoulder belt. Carrying the appliance using only the
shoulder belt makes it unstable. The shoulder belt may
come off or the appliance hit other objects and cause injury.
Attach the hooks of the shoulder belt onto the mounts
as shown in the figure certainly.
2
3
► 1. Shoulder belt 2. Hook 3. Mount
9 ENGLISH
1
1
1
2
3