Honeywell PC8900A Manual page 31

4. Programming Hold for 1 to 7 Days
a. Press HOLD.
SYSTEM
CHECK
HOLD
SET SYSTEM FAN
CLOCK HEAT OFF COOL DAY AUTO ON CIRC
SELECT
PERIOD HUMIDITY VENTILATE
TIME
TIME
CANCEL
b. Press HEAT/COOL SETPOINTS to display either
HEAT SET PT (if holding heat setpoint) or COOL
SET PT (if holding cool setpoint).
SYSTEM
CHECK
HEAT/COOL
SETPOINTS
SET SYSTEM FAN
CLOCK
HEAT OFF COOL DAY AUTO ON CIRC
SELECT
HUMIDITY VENTILATE
PERIOD TIME
TIME
CANCEL
c. Press and hold up or down arrowhead key until
desired holding temperature is displayed.
SYSTEM
CHECK
SET SYSTEM FAN
CLOCK DAY
HEAT OFF COOL AUTO ON CIRC
SELECT
PERIOD HUMIDITY VENTILATE
TIME
TIME
CANCEL
d. Press FAN for fan setting and VENTILATE for venti-
lation setting during hold.
SYSTEM
CHECK
FAN
SET SYSTEM
AUTO ON CIRC CLOCK DAY
HEAT OFF COOL
SELECT
HUMIDITY
PERIOD TIME
TIME
CANCEL
SYSTEM
CHECK
VENTILATE
SET SYSTEM
CLOCK HEAT OFF COOL DAY
SELECT
PERIOD HUMIDITY
TIME
TIME
CANCEL
e. Press DAY until the desired end day is displayed.
SYSTEM
CHECK
DAY
SET SYSTEM
CLOCK HEAT OFF COOL DAY
SELECT
PERIOD HUMIDITY
TIME
TIME
CANCEL
f. Press a TIME key until the desired end time is dis-
played.
SYSTEM
CHECK
TIME
TIME
SET SYSTEM
CLOCK
HEAT OFF COOL
SELECT
HUMIDITY
PERIOD
CANCEL
HEAT COOL SET PT
HEAT/COOL
SETPOINTS
HOLD
RUN
HEAT SET PT COOL
HEAT/COOL
SETPOINTS HOLD
RUN
HEAT SET PT COOL
HEAT/COOL
HOLD
SETPOINTS
RUN
HEAT SET PT COOL
FAN HEAT/COOL
SETPOINTS
AUTO ON CIRC
VENTILATE HOLD
RUN
HEAT SET PT COOL
FAN
AUTO
FAN HEAT/COOL
AUTO ON CIRC SETPOINTS
VENT
VENTILATE HOLD
RUN
PM
FAN HEAT/COOL
AUTO ON CIRC SETPOINTS
FRI
VENTILATE HOLD
RUN
PM
FAN HEAT/COOL
SETPOINTS
DAY AUTO ON CIRC
FRI
VENTILATE HOLD
TIME
TIME
RUN
M6247
NOTE: To cancel steps 4a. through 4f., press the
The temperature, fan and ventilation setting are in effect until
the day and time selected. At that time, the Comfort Center™
program returns to the regularly programmed settings.
M6241
Changing Settings for an Indefinite Amount of Time
The hold feature keeps one temperature that the Comfort
Center™ program holds continuously until CANCEL is
pressed to resume the program.
5. Programming Indefinite Hold
a. Press HOLD.
M6242
HOLD
b. Press HEAT/COOL SETPOINTS to display either
HEAT SET PT (if holding heat setpoint) or COOL
M6243
SET PT (if holding cool setpoint).
HEAT/COOL
FAN SETPOINTS
AUTO
c. Press and hold up or down arrowhead key until
M6244
desired holding temperature is displayed.
M6245
d. Press FAN for desired fan setting and VENTILATE
for desired ventilation setting during hold.
FAN
M6246
AUTO ON CIRC
VENTILATE
NOTE: To cancel steps 5a. through 5d., press the
31
CANCEL key.
SYSTEM
CHECK
SET SYSTEM FAN HEAT/COOL
CLOCK HEAT OFF COOL DAY AUTO ON CIRC SETPOINTS
SELECT
PERIOD HUMIDITY VENTILATE HOLD
TIME
TIME
CANCEL RUN
SYSTEM
CHECK
FAN
SET SYSTEM HEAT/COOL HOLD
CLOCK SETPOINTS
HEAT OFF COOL DAY AUTO ON CIRC
SELECT
HUMIDITY VENTILATE
PERIOD TIME
TIME
CANCEL RUN
SYSTEM
CHECK
SET SYSTEM FAN HEAT/COOL
HOLD
CLOCK DAY SETPOINTS
HEAT OFF COOL AUTO ON CIRC
SELECT
PERIOD HUMIDITY VENTILATE
TIME
TIME
CANCEL RUN
SYSTEM
HEAT SET PT
CHECK
SET SYSTEM FAN HEAT/COOL
CLOCK DAY SETPOINTS
HEAT OFF COOL AUTO ON CIRC
SELECT
PERIOD HUMIDITY VENTILATE HOLD
TIME
TIME
CANCEL RUN
SYSTEM
HEAT SET PT COOL
CHECK
SET SYSTEM FAN HEAT/COOL
CLOCK DAY SETPOINTS
HEAT OFF COOL AUTO ON CIRC
SELECT
HUMIDITY VENTILATE HOLD
PERIOD TIME
TIME
CANCEL RUN
CANCEL key.
HEAT COOL SET PT
M6241
HEAT SET PT COOL
M6242
HEAT SET PT COOL
M6243
COOL
FAN
AUTO
M6244
FAN
AUTO
VENT
M6245
68-0173—3