Operation; Maintenance; Optional Accessories - Makita 906 Instruction Manual

► Fig.3
To remove the wheel point, follow the installation proce-
dure in reverse.

OPERATION

► Fig.4
Turn the tool on without the wheel point making any
contact with the workpiece and wait until the wheel point
attains full speed. Then apply the wheel point to the
workpiece gently. To obtain a good finish, move the tool
in the leftward direction slowly.
CAUTION:
• Apply light pressure on the tool. Excessive
pressure on the tool will only cause a poor finish
and overloading of the motor.
• The wheel point continues to rotate after the tool
is switched off.
Dressing wheel point
► Fig.5: 1. Dressing stone
When the wheel point becomes "loaded" with various
bits and particles, you should dress the wheel point with
the dressing stone.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product SAFETY and RELIABILITY,
repairs, carbon brush inspection and replacement, any
other maintenance or adjustment should be performed
by Makita Authorized Service Centers, always using
Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Wheel points
• Collet cone set (3 mm, 6 mm, 1/4", 1/8")
• Wrench 10
• Wrench 17
• Dressing stone
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
6 ENGLISH