Hanil Supra R17 Quick Manual

Quick Guide
Display & Control Panel
Display Screen
Status of RPM / RCF / Time /
Temperature / ACC / DEC / Program
17000 01:10 25
Setting Speed Setting Temperature
Press once : Setting RPM -20℃ ~ 40℃
Press twice : Setting RCF Fast Cool : Quickly lower the tem-
perature of the chamber and the
rotor to the desired temperature
Setting Time
Up to < 10 hr
Continuous run(00:00)
Setting Run Parameters
(RPM / RCF / Time /
Temperature / ACC / DEC)
Saving / Calling Up
a Program
Save : Press the Program button twice
Call : Press the Program button once
Fast
Cool
Supra R17
Cat. No. : SU-R17
Program Save/Call
Press once : Calling up a program
Press twice : Saving a program
Setting ACC / DEC Rate
ACC (1 ~ 9 steps, Max.9)
DEC (0 ~ 9 steps, Natural DEC.0)
Set the desired temperature
(see 'Setting Run Parameters')
↓
Press the Temp
button more than 2sec.
Serial No.
Key Lock / Unlock
At Set Speed
LED On : Time is counted when reaching the set speed
LED Off : Time is counted immediately after the start
Press more than 2sec. : Setting number of end alarm
Press a parameter Enter the desired values
to be changed on the keypad
Press the Enter the desired program
Save or call button number on the keypad
Pulse
Enter the desired speed
(See 'Setting Run Parameters')
Max. RPM :
Max. RCF : 34,249 xg
End Alarm
Sound volume(0~10, 0: Silent)
Start / Stop
Pulse
After reaching the set
speed, the centrifugation
is decelated and stopped
Press the
Enter button
Press the
Enter button
Press the
Pulse button
Installation Date
17,000 rpm
Lid Open