• REMOVAL OF ANODE-CAP
NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon
painted on the CRT, after removing the anode.
• REMOVING PROCEDURES
a
1 Turn up one side of the rubber cap
in the direction indicated by the
arrow a.
• HOW TO HANDLE AN ANODE-CAP
1 Don't hurt the surface of anode-caps with shartp shaped
material!
2 Don't press the rubber hardly not to hurt inside of anode-
caps!
A material fitting called as shatter-hook terminal is built
in the rubber.
3 Don't turn the foot of rubber over hardly!
The shatter-hook terminal will stick out or hurt the
rubber.
2-4
b
2 Using a thumb pull up the rubber
cap firmly in the direction
indicated by the arrow b.
Anode Button
3 When one side of the rubber cap is
separated from the anode button,
the anode-cap can be removed by
turning up the rubber cap and
pulling up it in the direction of the
arrow c.
c
SSM-Q177/Q177CE