Page 1
A Smeg appliance is always the perfect match with other products of the line while also being a designer item for the kitchen. We hope you fully enjoy all the features of your appliance.
IMPORTANT INSTRUCTIONS Important instructions If the instructions contained in this manual are not followed WARNING: precisely, fire or explosion may result causing property damage, personal injury or death. READ AND SAVE THESE INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages throughout this manual and on the ap- pliance.
Page 3
IMPORTANT INSTRUCTIONS • This appliance is intended for use in the home only. • Use this appliance only for its intended purpose. The manu- facturer cannot be held liable for damage caused by improper use of this appliance. ATTENTION • This appliance complies with current safety regulations. Improper use of this appliance can result in personal injury and material damage.
IMPORTANT SAFEGUARDS WARNING When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and / or injury to person including the following: Follow all safety precautions to ensure safe assembling or disassembling parts and use of the appliance.
Page 5
IMPORTANT SAFEGUARDS For this appliance • Do not place the appliance on or near switched-on gas or electric burners, inside • Only insert water into the appropriate tank. an oven, or near heat sources. Use fresh, clean water. • Do not touch hot surfaces. Use handles and •...
Page 6
IMPORTANT SAFEGUARDS • Do not use abrasive cleaners or sharp 2. If the appliance is of the grounded objects to clean the appliance. type, the extension cord should be a • The use of an accessory not evaluated for grounding-type 3-wire cord; and use with this appliance may cause injuries.
IMPORTANT INSTRUCTIONS This user’s manual • Unplug the appliance. • Unplug the cord from the wall outlet. This user’s manual is an integral part of the appliance and must be kept intact and • Old electrical equipment must not available to the user throughout its life cycle. be disposed of with household waste! In accordance with the law in Use compliant with destination...
Page 8
Description / Assembly / Controls DESCRIPTION OF THE APPLIANCE IDENTIFICATION PLATE (Fig. A) The identification plate states the technical Machine body. data, serial number, and marking. Coffee bean container lid. The identification plate must never be removed. Coffee bean container. BEFORE FIRST USE Water tank cover.
Page 9
Controls machine is blocked until the components are Primary Keys LED white correctly reassembled. Ristretto coffee Brewing group alarm (24) Espresso coffee Steady lit LED: Brewing group missing or not correctly inserted; Coffee the machine is blocked until the brewing group (15) has been reassembled correctly (15).
Page 10
USE (Fig. E-F-G-H) Dispensing a drink • It is possible to adjust the position of the • Lift the lid (4) and insert cold water into the dispenser (11) according to the cup used. tank (5) taking care not to exceed the ‘Max’ For very high cups it is possible to remove level indicated, then refit the lid (4).
At the end of the self-cleaning cycle, the and preserve the aroma and taste of machine switches off. the coffee, it is recommended to use the Smeg Softener Filter (optional, MACHINE SETTINGS not supplied). For installation and (Fig. C-G) operation, follow the instructions that accompany the accessory.
Page 12
Use / Cleaning and maintenance CLEANING AND MAINTENANCE C l e a n i n g t h e c o f f e e g ro u n d s container (12) and internal tray (13) (Fig. C-E-G-H-I-L) Always empty the coffee grounds Manual rinse container with the appliance •...
Cleaning and maintenance • The descaling cycle ends when the solution • Refit the service door (8) making sure it is contained in the tank (5) is finished, the key correctly positioned. Do not wash the brewing group (18) and the LEDs (21) in the dishwasher in order not to (25) light up fixed.
Page 14
Cleaning and maintenance • The entire amount of water in the tank is discharged through the coffee circuit. • The pump continues to operate, even intermittently, to also empty the internal water circuits. • At the end of the procedure the machine switches off.
Page 15
What to do if..Problem Possible causes Solution Plug not inserted. Insert the plug. ON/OFF button not Press the button to start the pressed. machine. Descaling alarm activated Perform descaling. (LED 25 flashes). Full grounds container Empty the grounds container. The appliance does not alarm (LED 23 work.
Page 16
Problem Possible causes Solution Incorrect use of the Check lights or switch the Locked drawer. machine. machine off and on. Internal water circuit error. Make sure there is water in the tank and wait for the All the buttons are circuit to reset blinking simultaneously.