MA lighting grandMA2 User Manual

grandMA2 User Manual – Supplement MA Lighting
Version 3.9 – 2021-07-29
English
General Safety Instructions
Read all the instructions in the user's manual, especially the safety requirements see
Follow all instructions. Keep the user's manual for later use.
Follow all cautions and warnings indicated on the unit.
Disconnect the mains plug before cleaning the unit; don't use any liquid or spray cleanser. Clean with a dry cloth.
Do not use the unit near water. Do not expose it to a humid environment. Do not spill any liquid over the unit.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Do not block or cover any ventilation slots in the housing - they guarantee the reliable functioning of the unit and protect
it against overheating. Do not install the unit into a frame unless sufficient ventilation is guaranteed. Install in
accordance with the manufacturer's instructions.
Do not insert any objects through the slots of the unit, as these could get in contact with live parts or could cause short
circuits. This may cause a fire and an electric shock.
Do not place the unit on unstable surfaces. It may fall and get damaged.
Do not place any objects on the power cord. Protect it from being walked on or pinched particularly at plugs and the
point where they exit from the apparatus.
If using an extension cord, make sure the rated output of all units connected in aggregate does not exceed the maximum
rated output of the extension cord. The rated output of the units plugged into the socket should in aggregate not exceed
10 amperes.
If the power cord or the mains plug is damaged, let a qualified technician replace it immediately.
Only use power cords which are marked as safety-proof.
All service work should be exclusively performed by qualified service technicians.
Do not use any high-power walkie-talkies or cellular phones near the unit.
The unit is provided with a safety plug. This plug can only be used with safety sockets. These precautions should by all
means be followed. If the plug should not fit into a given socket (e.g. the case with old sockets), the socket should be
replaced by an electrician.
Do not ignore the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third
grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
As with all industrially manufactured goods, the use of substances that induce an allergic reaction such as aluminium
cannot be generally excluded. If you develop an allergic reaction (such as a skin rash, frequent sneezing, red eyes or
© 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-30 - tech.support@malighting.com - www.malighting.com
Safety requirements
1 of 2