Advertisement
Mounting
Assembling the ball valve
When selecting the mounting site
ensure that:
• The ball valve is accessible and
operable when power fails.
• The drive is mounted parallel to
the plumbing.
Mounting of the drive upside down
or transverse to the plumbing is
not allowed.
Place the drive on the valve. Observe the plumbing direction!
►
Screw the drive to the valve by using the 2 screws M 6x15.
►
Assign the device switch HS 30 to the Hometronic Manager as
►
described in the operating instructions of the device switch.
Mounting has been completed.
Right
Wrong
Advertisement
