2)
Lift the J6 connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.
Function test
After repair, be sure to confirm that all functions are working.
Table 4-1:
Test item
Te
Function test
st item
HDMI test
HDMI test
DP test
DP test
Audio test
Table 4-1:
Audio test
Support and troubleshooting
The following table lists possible problems, the possible cause or each problem, and the recommended
solutions.
22
Function test
Operating description
Operating description
Confirm whether image displays and sound
plays correctly on the monitor.
After repair, be sure to confirm that all functions are working.
Confirm whether image displays and sound
Confirm whether image displays and sound
plays correctly on the monitor.
plays correctly on the monitor.
Confirm whether image displays and sound
Change volume and balance to confirm whether
plays correctly on the monitor.
volume is smooth and loud enough.
Function test
Change volume and balance to confirm whether
volume is smooth and loud enough.
Tool used
Tool used
Computer or DVD player
Computer or DVD player
Computer or DVD player
Computer or DVD player
Speaker
Speaker