Table of Contents
Advertisement
Daylight
Daylight Saving
Update
Figure 4-52 Set Date and Time By NTP Server
Figure 4-53 Daylight
Select ON to activate the daylight-saving function if you are in a daylight
saving time zone (effective for NTP mode only), and then choose the starting
time ,ending time and time adjustment.
Note
Please click the "Save" button to save your image
settings. You can also click the left button "Reset to
Default" to set all the data and options as defaults.
You can update system firmware if the update file is available. It is the
customer's responsibility to update firmware. All camera motions will shut
down during firmware update. Close any other screens before starting a
firmware update. Never disconnect power and LAN cable during the firmware
update process. Rebooting the camera after firmware update may take
approx. 15 minutes. After you finish FW update, please reboot your computer
first time. Be careful, power can't be shut down when you're updating
firmware. Otherwise, it will cause FW update failure and you have to call back
to maintenance.
Figure 4-54 Firmware Update
Honeywell
33
Advertisement
Table of Contents
