Honeywell VENTI Series User Manual page 20

Overview of Navigation and Controls
Primary Stream
Image Mode
Resolution
Frame Rate
14
selection.
 Functions of MJPEG, MPEG-4and H.264 are effective. The video signal
sent to the Web-Client from the camera has a number of settings that can be
edited which affects the video as it's displayed in the Web-Client. The
Compression Settings view enables you to configure settings such as
Resolution, Frame Rate and Picture Quality. Besides, the network camera
supports dual streams (for display and storage), should be configured
separately.
1 The user interface of Primary Stream is as follows：
Figure 4-10 Primary Stream
Table below elaborates the above one.
Table 4-1Compression
Item
Compression
Function Choice
MJPEG
MPEG4
H.264
D1
4CIF
2CIF
VGA
CIF
QVGA
1--30
Remark
Set a default compression mode.
D1 is the highest resolution and,
QVGA is the lowest resolution.
MPEG4 only supports VGA and
QVGA.
The frame rate is displayed per
second.