Unit Features; Safety Instructions; General Safety Instructions - AEG LA 10 Operating Instructions Manual

1.4 Unit features

▪ Powerful compressor for conveniently
inflating vehicle and bicycle tyres, balls, etc.
▪ Manometer ring with adjustable air pressure
guide adjustable on the manometer ring
▪ Built-in storage battery for portable use
▪ Portable 12 V power source (vehicle outlet)
▪ Practical LED light for use at twilight and at
night
▪ Charge indicator
▪ Accessories: 230 V / 12 V charging mains
adapter plus 3 valve adapters for inflating balls,
bicycle tyres and recreational products
▪ Practical storage for cable, plug and
accessories
2.0 SAFETY
INSTRUCTIONS

2.1 General safety instructions

Warning!
Read all instructions! Failure to comply with safety
instructions may result in damage to property, or
personal or fatal injury! Keep these instructions for
future reference. Keep these operating instructions
for future reference and include them when
passing the product on to third parties. Also keep
these instructions accessible to third parties. The
operating instructions are a part of the unit.
2.1.1 Keep the unit away from children
and adolescents under age 16!
Children and adolescents under age
16 do not understand or recognise the potential
dangers of electrical devices. Keep the unit out of
the reach of children. Small parts could be swal-
lowed by children, possibly resulting in suffoca-
tion. Children and adolescents could become
injured when using the unit. Also keep the pack-
aging away from children.
2.1.2 Please retain the operating instructions for
the life of the unit.
2.1.3 This unit is not intended for use by individu-
als (including children) with limited physical, sen-
sory or cognitive capacity or lacking experience
and / or knowledge unless supervised or instruc-
ed on its use by an individual responsible for their
safety.
2.1.4 If you are unsure about the installation, use
or operation of the unit please consult a qualified
professional.
2.1.5 The unit and compressed air
hose will vibrate and heat up during
operation. Always place the unit in a
secure, well ventilated location.
2.1.6 Do not expose the unit to mechanical
stress, high temperatures, oils, greases, solvents,
moisture or shock!
2.1.7 Only operate the unit if no damage or
malfunctions of the unit, cables or accessories
are present!
2.1.8 All repairs to the unit must be performed by
a qualified electrician / professional.
2.1.9 Do not modify (alter) the unit.
2.1.10 Do not operate the unit if it has been
dropped or otherwise damaged. Instead, have it
inspected or repaired by a qualified electrician!
2.1.11 Never use other cables or accessories. Do
not extend the cable.
2.1.12 Allow a clearance of at least 18 cm
around the unit during operation to ensure
adequate circulation. Never cover the unit with
objects!
GB 17