Replacing The Fixed Knife And Movable Knife - Brother Z-8550B Instruction Manual

Replacing the fixed knife and movable knife

Related Models:
Z-8560B
Removing the fixed knife and movable knife
1
Remove the two screws (1), and then remove the
knife unit (2).
2
Remove the four screws (3), and then remove the
knife holder (4).
3
Remove the fixed knife (5) and the movable knife
(6).
Installing the fixed knife and movable knife
4
Install the fixed knife (5) and the movable knife (6)
to the knife base plate (7).
5
Install the knife holder (4) with the four screws (3).
6
Install the needle plate (8) if it is not already
installed.
7
Install the knife unit (2) securely to the edge of the
needle plate (8) with the two screws (1).
Related Information
• Points to note when replacing parts on page 97
• Adjusting the tension of the lower thread presser
spring on page 121
98