AEG FRTD 903 TC User Manual page 111

Sensor Application
Mon 11:15
23.5
°
17:00
Manual Other...
Mon 11:15 Floor
1
5
Room/Floor Limit
23.5
°
17:00
Room
6
Manual Other...
Heating Schedule Heating Schedule
Adaptive Function
Heating Schedule Energy Use Energy Use
Open Window
Energy Use User Settings
User Settings
2
Sensor Application
Engineer Settings Engineer Settings User Settings
Sensor Type
Engineer Settings
Floor Sens. Calibr. Adaptive Function
Room Sens. Calibr. Open Window Adaptive Function
3
Sensor Application Open Window Temp. Scale
Sensor Type Sensor Application Factory Reset
Floor Sens. Calibr. Sensor Type
Floor Sens. Calibr.
Room Sens. Calibr.
You can set the sensor
Temp. Scale Room Sens. Calibr.
to use floor or room
readings. Set?
Factory Reset Temp. Scale
Factory Reset
3
Page 47
© 2016 OJ Electronics A/S
This option allows you to choose which sensor is used to control the heating
system .
1
• Floor (default): With this setting, the floor sensor controls the heating system.
• Room/Floor Limit (advanced): With this setting, the room sensor controls the
heating system subject to maximum and minimum limits for floor temperature .
The maximum temperature limit protects wooden floors from excessive heat .
The minimum temperature limit prevents the floor from becoming uncomfortably
cold when heating is not needed, e .g . in a bathroom . Note that this function will
increase energy consumption .
Floor Limit temperatures are set in the "Temperature Scale" menu .
Maximum temperature depends on floor type and temperature scale .
1 . Tap the "Menu" button on the home screen .
2 . Then tap the "engineer settings" button .
3 . Tap the "sensor application" button .
4 . Confirm that you want to set the Sensor Application .
5 . Then tap the application you want to use .
6 . Confirm your choice with "√" or discard it with "X" .
7 . The thermostat will automatically return to "engineer settings" .
< >
Contents