Download
Share
Print this page
Fujitsu F2MC-8FX Series Setup Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Semiconductors
  5. F2MC-8FX Series
  6. Setup manual
Fujitsu F2MC-8FX Series Setup Manual

Fujitsu F2MC-8FX Series Setup Manual

Starter kit (ver. 3v)
Hide thumbs Also See for F2MC-8FX Series:

Advertisement

Quick Links

Download this manual
The Fujitsu Limited reorganized its LSI business into a wholly owned subsidiary, the Fujitsu
Microelectronics Limited on March 21, 2008.
The corporate names "Fujitsu" and "Fujitsu Limited" described all in this document have been
revised to the "Fujitsu Microelectronics Limited". Thank you for your cooperation and
understanding this notice.
Moreover, there are no changes in the related documents other than corporate names revised.
Customers are advised to consult with sales representatives before ordering.
Corporate names revised in the documents
March 21, 2008
Fujitsu Microelectronics Limited

Advertisement

loading

Related Manuals for Fujitsu F2MC-8FX Series

Summary of Contents for Fujitsu F2MC-8FX Series

  • Page 1 Corporate names revised in the documents The Fujitsu Limited reorganized its LSI business into a wholly owned subsidiary, the Fujitsu Microelectronics Limited on March 21, 2008. The corporate names “Fujitsu” and “Fujitsu Limited” described all in this document have been revised to the “Fujitsu Microelectronics Limited”.
  • Page 2 FUJITSU SEMICONDUCTOR SS01-26029-1E SUPPORT SYSTEM MC-8FX Family STARTER KIT (ver. 3V) MB2146-401-01A SETUP GUIDE...
  • Page 3 For mass production/evaluation MCUs for this product, consult with sales representatives or support representatives. *1 : F MC is the abbreviation of FUJITSU Flexible Microcontroller. *2 : Referred below as the “Starter Kit”. *3 : Referred below as the “BGM Adapter”.
  • Page 4 ■ Caution of the products described in this document The following precautions apply to the product described in this manual. Indicates a potentially hazardous situation which, if not avoided appropriately, WARNING could result in death or serious injury and/or a fault in the user’s system. Electric shock, Before performing any operation described in this manual, turn off all the power supplies to the system.
  • Page 5 (i.e., submersible repeater and artificial satellite). Please note that FUJITSU will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.

  • Page 6: Handling Precautions

    1. Checking the Delivered Product Before using the product, make sure that the following components are included: Host computer The inside of a dashed line is the package of this product. MC-8L/8FX Family Professional Pack OFTUNE Evaluation Version OFTUNE USB Cable Connector (BGM Adapter enclosure) MB2146-09A-E (BGM Adapter)

  • Page 7: Hardware Setup

    3. Feature The F MC-8FX starter kit is the best for a performance and functional evaluation, and a check of operation before including F MC-8FX in a user's system.By carrying out additional purchase of the header board, continuation use also of the evaluation with a user's system can be carried out. Below, the feature of the BGM debugger for F MC-8FX is shown.
  • Page 8 4.1 Configuration of Each Product This section describes how to configure the MCU Board and the Evaluation Board. ■ Configuring MCU Board Set the following switches on the MCU Board, referring to "Figure 1 MCU Board Configuration". GNDVCC PRODUCT SELECT 1 2 3 4 1 2 3 4 ADAPTER...
  • Page 9 ■ Configuring Evaluation Board Set the following switches on the Evaluation Board, referring to "Figure 2 Evaluation Board Con- figurarion". +3.3V (1) 5V/3.3V Power supply selector jumper plug Set the value to the side of "+3.3V". (2) Analog power supply jumper plug Insert jumper plug for all the switches.
  • Page 10 4.2 Connection of Each Product This section describes how to connect the MCU Board, the Evaluation Board, and the BGM Adapter. This section also describes how to mount the crystal oscillator on the MCU Board, and how to plug the AC adapter into the Evaluation Board. ■...
  • Page 11 ■ Connecting BGM Adapter Connect the BGM Adapter and the MCU Board, referring to "Figure 4 Connection of BGM Adapt- er". The BGM Adapter and the MCU Board have an index mark (for pin 1) on its connectors. Align the index mark on both sides. Plug a USB cable into the BGM Adapter (the cable is bundled with the BGM Adapter).
  • Page 12 ■ Connecting Oscillators Plug crystal/ceramic oscillators into the crystal oscillator mounting sockets (one for the main clock and the other for the subclock) on the MCU Board (See "Figure 5 Connection of oscillators") . You can see one crystal oscillator mounting socket for main clock and the other for subclock on the MCU Board.
  • Page 13 ■ Connecting AC Adapter Connect the AC Adapter and the Evaluation Board, referring to "Figure 6 Connection of AC Adapt- er". The AC Adapter (bundled with the Evaluation Board) is plugged into the PJ1 on Evaluation Board and the AC 100V Power Supply. Evaluation Board BGM Adapter Plug into Evaluation Board...

  • Page 14: Software Setup

    5. Software Setup In the software setup procedure, you install and operate the software applications. This chapter includes the installing and operating procedure for each software in order. Check the contents and complete the software setup. • Installation of software - Installing S OFTUNE - Installing USB driver...
  • Page 15 The [Install New Hardware Device Drivers] screen appears. Click [Search for a suitable driver for my device (recommended)], and then click [Next] to search for a suitable driver for your device. The [Locate Driver Files] screen appears. Check [Specify a location], and then click [Next] to specify the location for the driver. A file location dialog appears.
  • Page 16 In the [Copy manufacturer’s files from] box, make sure that the "\Drivers" folder (under a directory where S is installed) is selected, and click [OK]. OFTUNE The [Driver Files Search Results] screen appears. Click [Next] to start installing the driver. The [Completing the Found New Hardware Wizard] screen appears.
  • Page 17 ■ Installing Sample Program Copy only a folder named "\fsg" under "\MANUAL\FirstStepGuide" in S CD into the "\sam- OFTUNE ple" folder under a directory where S is installed. OFTUNE All the data in the "\fsg" folder is set to "read-only". Open the folder’s properties, and deselect the [Read Only] checkbox, and click [OK].
  • Page 18 5.2 Operation of S OFTUNE This section describes how to start S Workbench and operate it using the sample program. OFTUNE ■ Starting S Workbench OFTUNE Start S and configure the S development environment. From the [File] menu, click OFTUNE OFTUNE [Open Workspace].
  • Page 19 Select and right-click "emu_dbg.sup" under the "Debug" folder, then click [Change Settings] to start the setup wizard.
  • Page 20 The setup wizard is started. Click [Next]. In [Debug Type], specify [Emulator Debugger], and click [Next]. In [ICE Type], specify [MB2146-09], and click [Next].
  • Page 21 In [Device Name], specify [USB], and click [Next]. In Frequency[Main], set the frequency of oscillator connected to MCU Board, and click [Next]. The [Batch file] setting is not required. Click [Next].
  • Page 22 Check [Auto-load when starting debug], and specify "fsg_sample.prc" in [After] under [Specifica- tion batch file before/after load], then click [Next]. Check [Select All], and click [Next]. Click [Finish] to complete the setup of S development environment. OFTUNE...
  • Page 23 ■ Starting Debugging <Turning Evaluation Board on> Before starting debugging, turn the Evaluation Board on. Push POWER-SW on the Board to ON (to the side of " | ") to turn it on (See "Connecting BGM Adapter" for information about POWER-SW) . After the Evaluation Board is turned on, click [Start debug] from the [Debug] menu to start debug- ging.
  • Page 24 ■ Initializing MCU Initialize MCU. To do so, click the Reset button on the task bar. Reset button...
  • Page 25 ■ Running the Program You can run the program by clicking the "execution-related buttons" on the task bar. You can also set a breakpoint by clicking the " " mark in the Source window. [Execution-related buttons] [Go] [Step In] [Step Over] [Step Out] [Run Until Cursor] Source window...
  • Page 26 ■ Aborting the Program After you have run the program, you can stop it by clicking the Abort button on the task bar. Abort button...
  • Page 27 ■ Ending Debugging To end debugging, click [End debug] from the [Debug] menu. <Turning Evaluation Board off> After you have finished debugging, turn the Evaluation Board off for safety. Push POWER-SW on the Board to OFF (to the side of " ") to turn it off.
  • Page 28 ■ Exiting S Workbench OFTUNE To exit S Workbench, click [Exit] from the [File] menu. OFTUNE...
  • Page 29 SS01-26029-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSYEM MC-8FX Family STARTER KIT (ver. 3V) MB2146-401-01A SETUP GUIDE February 2008 the first edition Published FUJITSU LIMITED Electronic Devices Edited Strategic Business Development Dept.

This manual is also suitable for:

Mb2146-401-01a