Cisco Firepower 1100 Started Manual page 169

ASA Deployment with ASDM
You can optionally check the Force registration check box to register an ASA that is already registered, but
that might be out of sync with the License Authority. For example, use Force registration if the ASA was
accidentally removed from the Smart Software Manager.
Step 6 Click Register.
The ASA registers with the License Authority using the pre-configured outside interface, and requests
authorization for the configured license entitlements. The License Authority also applies the Strong Encryption
(3DES/AES) license if your account allows. ASDM refreshes the page when the license status is updated.
You can also choose Monitoring > Properties > Smart License to check the license status, particularly if
the registration fails.
Step 7 Set the following parameters:
a) Check Enable Smart license configuration.
b) From the Feature Tier drop-down list, choose Standard.
Only the Standard tier is available.
c) (Optional) For the Context license, enter the number of contexts.
You can use 2 contexts without a license. The maximum number of contexts depends on your model:
For example, to use the maximum of 5 contexts on the Firepower 1120, enter 3 for the number of contexts;
this value is added to the default of 2.
Step 8 (Optional) The Enable strong-encryption protocol is generally not required; for example, ASAs that use
older Satellite Server versions (pre-2.3.0) require this license, but you can check this box if you know you
need to, or if you want to track usage of this license in your account.
• Firepower 1120—5 contexts
• Firepower 1140—10 contexts
• Firepower 1150—15 contexts
Cisco Firepower 1100 Getting Started Guide
Configure Licensing
167