Working In Self-Leveling Mode - AEG CLR215 Original Instructions Manual

WORKING IN SELF-LEVELING MODE

In self-leveling mode the cross laser will level itself in a ±3° range and can project a
horizontal beam, a vertical beam (CLR215 only) or both beams simultaneously.
1
Place the cross laser on a solid
fl at vibration free surface or on a
tripod.
2
Slide locking switch to the ON
position.
3
The cross laser will generate
2 laser beams.
- vertical beam forward
- horizontal beam forward
The cross laser will generate
forward cross beam when all
beams are activated.
ENGLISH
4
Choose the beams that you
1/4" male thread
want to work with by
pushing the button. Switch
ON or OFF the beam by
pressing the
button more
than 1 second
5
If the initial level of the
cross laser is beyond ± 3°
and the self-leveling mode
is activated, the laser
beams will fl ash
In this case reposition the
cross laser.
6
Before moving the cross laser, slide the
locking switch the OFF
lock the pendulum and protect
your cross laser.
CLR215 only:
> 3°
> 3°
position. This will
6