Tilt, Telescopic Lever/Steering Column Tilt Pedal - Hitachi ZW 120-6 Operator's Manual

Tilt, Telescopic Lever/Steering Column Tilt Pedal

d
WARNING:
 Before operating the machine, be sure that the
steering wheel is locked.
 Do not operate the tilt, telescopic lever (1) and
steering column tilt pedal (2) during operation.
 Before operating the machine, adjust the steering
column inclination so as to match the operator's physical
constitution.
Pull lever (1) to set the steering column inclination to
the desired position. Push lever (1) until it contacts the
stopper, ensuring the steering column is locked.
 By depressing steering column tilt pedal (2), the steering
column moves forward, and the distance between the
operator's seat and the steering wheel increases, allowing
operator to get on and off the machine easily.
 After moving the steering column forward, pull the
steering wheel to the operator side. The steering column
will be automatically locked in the regular position and
the machine becomes operable.
d
CAUTION: Never attempt to drive the machine while
moving the steering column forward.
OPERATOR'S STATION
1
1-53
MNDB-01-002
2