Table of Contents
Advertisement
o Finally you should select the actual power level that you want
the hob to cook on, after the automatic heat up period has
completed, by using the minus button (7).
o The cooking zone indicator (1) will alternate between showing
the actual power level and the symbol A.
o Once the automatic pre-heating time period is over, only the
actual power level will show on the cooking zone indicator (1).
o The period of time that a zone will automatically pre-heat for
before dropping to the actual power level, is shown in the table
below:-
LEVEL
Changing the power level during automatic pre-heating
o If a zone is already within automatic pre-heating mode and
you wish to adjust the power level. You firstly need to make
sure that the zone you wish to adjust is selected by pressing
the corresponding cooking zone selection button (2).
o A decimal point symbol (3) will appear to show that the zone
is active.
o Change the power level by pressing the minus (8) or plus (7)
buttons.
o If the power level is increased, then the pre-heating time will
be adjusted. It will take into account the amount of time that
has already elapsed.
TIME LIMIT
1
1 minute
2
3 minutes
3
4 minutes 48 seconds
4
6 minutes 30 seconds
5
8 minutes 30 seconds
6
2 minutes 30 seconds
7
3 minutes 30 seconds
8
4 minutes 30 seconds
9
N/A
14
Advertisement
Table of Contents
