Dt-364Ioe (Bridge Satellite Cradle) - Casio DT-300 Hardware Manual

2.2 DT-364IOE (Bridge Satellite Cradle)

<Top>
<Front>
<Bottom>
Table 2.2
No. Name
1 USB port
2 RS-232C port
3 RS-422C port
4 Terminal detect
switch
5 IR port
6 Power contacts
7 Power switch
8 AC adaptor jack
9 System status
indicator lamp
(LINE)
<Right Side>
This port accepts connection of a USB cable for connection to a computer
for transfer of system data and file data. Use of the USB port requires
installation of a special driver on the PC.
This port accepts connection of an RS-232C cable for connection to a
computer for transfer of system data and file data. Use of the RS-232C port
requires installation of a special driver on the PC.
This port is used when connecting to another Bridge Satellite Cradle.
This switch detects when the DT-300 is seated correctly on the Cradle.
This port transfers data with the DT-300 IR port non-contact data
communication.
Power is supplied to the DT-300 via these contacts.
Turns the power on and off.
Connect the AC adaptor here.
This lamp indicates whether the system is operating normally. Regardless
of whether or not an DT-300 is mounted this lamp indicates the system
status and whether or not a communication operation with the system can
be performed.
Off : System is not operating.
Green : System is operating.
8
<Back>
Fig. 2.2
Description