Table of Contents
Advertisement
Normal Operation
2. Turn the outer knob one
click clockwise to move the
cursor to the next character
field as shown in Figure 41.
Turn the inner knob to select
the desired character.
3. Turn the outer knob one
click clockwise to move the
cursor to the next character
field. Turn the inner knob to
select the desired character.
See Figure 42.
Figure 41
4. Turn the outer knob one
click clockwise to move the
cursor to the next character
field. Turn the inner knob to
select the desired character.
5. Press the OK softkey
when finished making selec-
tions. The display will be as
shown in Figure 43.
6. Move the joystick right or
left to view available reports.
NOTE: Available reports
highlighted in yellow, like
KMCW in Figure 43, indi-
cates the report is a special
report, urgent report or an
amended report.
Figure 43
36
Revision 2 Nov/2002
KMD 550/850 FIS Addendum
Advertisement
Table of Contents
