Table of Contents
Advertisement
8. Agency Label Information
8.1. External FCC/IC Labels
Table
6-2
The TX Power setting may be changed via the Authentication Device when a special application (app) is
installed. This app is considered to be Honeywell sensitive material and is made available only to the
qualified Professional Installer. Due to radio approval body regulations, changing the TX Power setting is
only available if the professional installer option has been explicitly enabled on your Authentication
Device. If you do not have the professional installer option enabled and would like to do so, then please
contact Honeywell Global Technical Services (GTS). A separate application, AuthDev Power Settings, is
required to enable the "Write TX Power Level" option.
When this app is installed in the AD, the TX power setting, normally a read-only parameter, becomes a
read/write parameter.
The TX Power adjustment feature is provided for Professional Installers to adjust the OneWireless Adapter
TX power to match a change in the selection of antenna and cables made at the installation site and still
ensure that the EIRP does not exceed the regulatory limits.
8.
Agency Label Information
The following information shall be clearly and permanently labeled on the XYR 6000 Transmitter unit:
8.1 External FCC/IC Labels
8.1.1
50016195-001 – Transmitters with FHSS Radios
14
OneWireless Adapter Professional Installation Guide
Revision 1
May 2011
Advertisement
Table of Contents
