Designation, Scope And Preface; Designation; Scope; Preface - Honeywell OneWireless OWA100 Professional Installation Manual

1.

Designation, Scope and Preface

1.1 Designation

This document is valid for the OneWireless Adapter (OWA). The OneWireless Adapter is intended to be
directly connected to a HART device or network and provide a wireless interface between the wired
HART network and the wireless ISA100 network.

1.2 Scope

This document outlines professional installation requirements for the Honeywell OneWireless Adapter.
Professional installation is required to comply with certification agency and legal requirements. This
document must be adhered to for all installations of the Honeywell OneWireless Adapter.

1.3 Preface

This manual covers professional installation of the Honeywell OneWireless Adapter. See the Getting
Started with Honeywell OneWireless, Honeywell OneWireless Planning Guide and Honeywell
OneWireless Adapter User's Guides for general information on overall system implementation,
configuration, and management of these devices.
The OneWireless Adapter is classified by the FCC as a device that must be professionally installed.

1.4 Site survey

It is assumed for the purposes of this document that a site survey has been performed and that the
OneWireless Adapter is installed in a location consistent with the Model Selection Guide selection. Any
changes to the location as a result of the actual installation of the OneWireless Adapters into the site may
require that the TX power setting of the radio board needs to be adjusted from the factory setting in order
to maintain agency approvals. See
for more information.
Revision 1
May 2011
Equivalent Isotropically Radiated Power (EIRP)
OneWireless Adapter Professional Installation Guide
1. Designation, Scope and Preface
1.1. Designation
and Setting TX Power
1