Installation Environment - Honeywell CENTRA LINE WEB-HMI Series User Manual

USER'S MANUAL FOR HTML5 PANELS WEB-HMI CAPACITIVE TOUCH SCREEN

Installation Environment

Avoid prolonged exposition to direct sunlight to avoid the risk of overheating the
device.
The equipment is not intended for installation in contact with corrosive chemical
compounds. Check the resistance of the front panel to a specific compound before
installation.
Do not use tools of any kind (screwdrivers, etc.) to operate the touch screen of the
panel.
In order to meet the front panel protection classifications, proper installation
procedure must be followed:
• the borders of the cutout must be flat
• fasten each fixing screw until the bezel corner comes into contact with the panel.
• the cutout for the panel must be of the dimensions indicated in this manual.
The IP66 is guaranteed only if:
• max deviation from the plane surface to the cut-out: ≤0.5 mm
• thickness of the case where is mounted the equipment: from 1.5 mm to 6 mm
• maximum surface roughness where the gasket is applied: ≤120 μm.
Figure 3. Installation Environment (Example)
A. WEB-HMI
B. Installation cut-out
15 EN2Z-1070GE51 R0920