Changing The Picture Size; Display A Still Image - AEG CTV 4837 ST Operating Instructions Manual

Changing the Picture Size

You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ASPECT modes.
■
The Auto aspect mode is fixed at Full when you are using the TV as a PC screen.
■
1
Press the ( ) button on the remote control.
When you are viewing the Main image:
■
The image will change as shown below whenever you press
this button.
( Original ➔ 16:9 ➔ 4:3 ➔ 14:9 ➔ Zoom ➔ Panorama )
Original
14: 9
Auto : When a WSS (Wide Screen Signalling) signal, which shows
the aspect ratio of the picture, is included in the broadcast signal or
the signal from an external device, the TV automatically changes the
4:3 Full mode according to the WSS signal.
If a WSS signal is not included, the picture is displayed according to
the with the 4:3 Auto aspect function.
4:3 Normal : Use to view a normal picture (4:3 aspect ratio) as this
is its original shape.
16:9 : This uniformly stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the wide TV screen.
For 16:9 aspect ratio pictures that have been squeezed into a
normal picture (4:3 aspect ratio), use the Full mode to restore
the picture to its original shape.
14:9 : This zooms up the 4:3 picture (16:9 aspect ratio)
to the full screen.
Zoom : The screen that expands 14:9 Zoom screen vertically
or horizontally.
Panorama : The screen that expands 4:3 video horizontally
to fit the 16:4 mode screen and to minimize distortion, sides
are expanded more than center.

Display a Still Image

1
Press the Still (
The picture does not move but the sound plays normally.
■
Press this button again if you want to go back to a normal
■
picture.
4:3
SUBTITLE
Zoom
) button on the remote control.
16:9
Picture
:Position
Panorama
Audio Timer Install Setup Option
Language
Geometry
Aspect Mode Auto
Aspect
Favourite Channel
16:9
4:3 PIP Size
14:9 PIP Position
Set ID
Zoom
Panorama
Factory Preset
Original
/OK:Select MENU:Previous EXIT:Exit Aspect Mode
SOURCE
English
31