No Signal Auto Power Off; No Key Operation Auto Power Off; Reducing Picture Noise - AEG CTV 4837 ST Operating Instructions Manual

No Signal Auto Power Off

Automatically turns the power off if there is no broadcast signal or button pressed
for some time.
Picture Audio Timer
0:OFF, 1~20
:Adjus MENU:Previous EXIT:Exit

No Key Operation Auto Power Off

Automatically turns the power off if there is no button pressed for a period of time after
AUTO Wake-Up turns the power on.
Picture Audio Timer
0:OFF, 30~180(Step:30)
:Adjus MENU:Previous EXIT:Exit

Reducing Picture Noise

Use this function when you have a bad image with the picture noise.
Picture Audio Timer
Noise Reduction
On
Off
:Position /OK:Select MENU:Previous EXIT:Exit
24
Install Setup Option
Local Lock Off
OSD Setting
No Signal Power Off 20
No Operation Power Off 180
Noise Reduction On
Viewell Engin
No Signal Power Off
Install Setup Option
Local Lock Off
OSD Setting
No Signal Power Off 20
No Operation Power Off 180
Noise Reduction On
Viewell Engin
No Operation Power Off
Install Setup Option
Local Lock Off
OSD Setting
No Signal Power Off 20
No Operation Power Off 180
Noise Reduction On
Viewell Engin
Noise Reduction
1
Press the MENU button.
2
Press the ( ) button to select the Option group and press
the OK button.
3
Press the ( ) button to select No Signal Power Off .
4
Press the ( ) buttons to adjust the auto power off time.
You can adjust it in 1-minute increments from 0 to 20
■
minutes. ( 0 ➔ 1 ➔ 2 ➔ ... ➔ 18 ➔ 19 ➔ 20 )
It you set the time to 0, the TV will not use the auto power
■
off function.
1
Press the MENU button.
2
Press the ( ) button to select the Option group and press
the OK button.
3
Press the ( ) button to select No Operation Power Off .
4
Press the ( ) buttons to adjust the auto power off time.
You can adjust it in 30-minute increments from 0 to 180
■
minutes. ( 0 ➔ 30 ➔ 60 ➔ 90 ➔ 120 ➔ 150 ➔ 180 )
It you set the time to 0, the TV will not use the auto power
■
off function.
1
Press the MENU button.
2
Press the ( ) button to select the Option group and press
the OK button.
3
Press the ( ) button to select Noise Reduction.
Press the OK button.
4
Press the ( ) button to select On or Off.
Whenever you press the (
■
switch between On and Off.
) button, the selection wil