Sony DNW-A75 Maintenance Manual page 167

A3F : NV-RAM CONTROL
This menu is used to save the Betacam PB adjustment data
adjusted in the BETACAM PB ADJUST mode into the
NV-RAM.
The current adjustment data can return to the former saved
data before adjustment when executing "ALL DATA
PREVIOUS" without saving the adjustment data into the
NV-RAM.
n
When the power is turned off without saving the adjusted
data, the adjustment data returns to the former saved data.
To execute the menu
(1) Turn the search dial to set the * mark on the superim-
posed display as described below.
To save the adjustment data after adjustment:
8 "SAVE ALL ADJUST DATA"
To return to the adjustment data before adjustment:
8 "ALL DATA PREVIOUS"
. In the time data display area, a message "SAVE
ALL ADJUST" or "ALL DATA PREVIOU" will be
displayed, respectively.
(2) Press the SET button once.
. On pressing it, the data transmission is initiated.
. On the superimposed display, a message "Saving ..."
or "Loading ..." will be displayed.
In the time data display area, a message "SAVING"
or "LOADING" will be displayed.
(3) Check to see that the data transmission is completed.
. On completing the data transmission:
On the superimposed display, a message "Save
Complete." or "Load Complete" will be displayed.
In the time data display area, a message "SAVING"
or "LOADING" will be displayed.
(4) To exit the menu, press the MENU button once.
DNW-A75/A75P
4-2-11. BETACAM PB ADJUST Mode (A3)
Example of display and operation
(In data save)
Superimposed display
BETACAM PB ADJUST MODE
A3:NV-RAM CONTROL
*
NO OPERATION
SAVE ALL ADJUST DATA
ALL DATA PREVIOUS
(1) 0
DIAL (2)
BETACAM PB ADJUST MODE
A3:NV-RAM CONTROL
NO OPERATION
*
SAVE ALL ADJUST DATA
ALL DATA PREVIOUS
(2) 0 [SET]
BETACAM PB ADJUST MODE
A3:NV-RAM CONTROL
Saving ...
0
BETACAM PB ADJUST MODE
A3:NV-RAM CONTROL
Save Complete
(3)
0 Check
[MENU]
(4)
0
4-2. TAPE Maintenance Mode (M0)
Time data display area
NO OPERA
TION
SAVE ALL
ADJUST
SAVING
SAVE CO
MPLETE
4-77