Table of Contents
Advertisement
4. Check "Specify a location," and uncheck all other options; then type the following into
the location box: e:\Vigor520\win98
installation CD
5. Insert the
the driver and show information about it.
6. Choose
. Installation will begin.
Next
7. Follow the on-screen instructions to finish.
Microsoft Windows ME (uses the Windows 98 driver):
1. Insert the adapter. Windows ME will detect the adapter and start the Add New Hardware
Wizard.
2. Select "Specify the location of the driver (Advanced)" and choose
3. Make sure "Search for the best driver for your device (Recommended)" is selected; under
it, check both "Removable Media (Floppy, CD-ROM....)" and "Specify a location"; then
type the following into the location box: e:\Vigor520\win98
installation CD
4. Insert the
the driver and show information about it.
5. Choose
. Installation will begin.
Next
6. Follow the on-screen instructions to finish.
Microsoft Windows 2000:
1. Insert the adapter. Windows 2000 will detect the adapter and start the Found New
Hardware Wizard.
2. Choose
.
Next
3. Select "Search for a suitable driver for my device" and choose
4. Select "Specify a location" and choose
5. Insert the Installation CD and type the following into the location box:
e:\Vigor520\win2k
6. Choose
. The Found New Hardware Wizard will find the driver and display
Next
information about it.
7. Choose
; then choose
Next
8. When the Found New Hardware Wizard indicates that installation is complete, choose
.
Finish
and choose
. The Add New Hardware Wizard will find
Next
and choose
. The Add New Hardware Wizard will find
Next
.
Next
. Installation will begin.
Yes
9
.
Next
.
Next
Advertisement
Table of Contents
