Modify Master Pin Code; Add A User Record; Delete A User - Philips EasyKey 7000 Series User Manual

How to enter master
mode
Light up the keypad and enter [#]
before you enter any other numbers,
then enter master PIN code and confirm
with [#].

Modify master PIN code

Enter [#] and enter master PIN code,
then confirm with [#].
1
Enter [1] to modify master PIN code.
Enter the new master PIN code and
confirm with [#]. Re-enter the same
master PIN code and confirm with
[#]. After hearing a voice prompt of
"Succeeded", press [*] to return to
previous menu until you finally exit
master mode.
10

Add a user record

Add a user PIN code
Enter [#] and enter master PIN code,
then confirm with [#].
2 1
Enter [2] to enter user registration and
enter [1] to add a new user PIN code,
then the system will automatically
number it and generate a voice prompt.
Enter a user PIN code of 6 to 12 digits
and confirm with [#]. Then re-enter the
user PIN code and confirm with [#].
After hearing a voice prompt of
"Succeeded", press [*] until you finally
exit master mode.
Add one-time PIN code
Enter [#] and enter master PIN code,
then confirm with [#].
2 2
Enter [2] to enter user settings, then
enter [2] again to add a one-time PIN code.
Enter a user PIN code of 6 to 12 digits
and confirm with [#]. Then re-enter the
user PIN code and confirm with [#].
After hearing a voice prompt of
"Succeeded", press [*] until you finally
exit master mode.
Add a fingerprint
Enter [#] and enter master PIN code,
then confirm with [#].
2 3
Enter [2] to enter user registration and
enter [3] to add a user fingerprint, then
the system will automatically number it
and generate a voice prompt.
Place your finger on the fingerprint
sensor until you hear a voice prompt
of "Move your finger and put on
again". Lift your finger and repeat
the process until you hear a voice
prompt of "Succeeded". After you have
successfully registered your fingerprint,
press [*] until you finally exit the
master mode.
Add a keytag
Enter [#] and enter master PIN code,
then confirm with [#].
4
2
Enter [2] to enter user registration and
enter [4] to add a user key tag, then the
system will automatically number it
and generate a voice prompt.
Place the key tag against the card
reader. After hearing a voice prompt of
"Succeeded', press [*] until you finally
exit the master mode.
Delete a user record
Delete a single user PIN code
Enter [#] and enter master PIN code,
then confirm with [#].
Enter [3] to enter user record deletion
and enter [1] to enter user PIN code
deletion, then enter [1] to delete a
single user PIN code.
Enter a 2-digit code (code: 00-09) to
be deleted and confirm with[#]. After
hearing a voice prompt of "Succeeded",
press [*] until you finally exit the master
mode.
Delete all user PIN code
Enter [#] and enter master PIN code,
then confirm with [#].
Enter [3] to enter user record deletion
and enter [1] to enter user PIN code
deletion, then enter [2] to delete all
user PIN code. After hearing a voice
prompt of "Succeeded", press [*] until
you finally exit the master mode.
11