Connecting Peripheral Devices - NEC Express5800 Series User Manual

Chapter 2 Preparations
2.2

Connecting Peripheral Devices

Connect peripheral devices to the CPU blade.
Tips
Important
Be sure to observe the following precautions to use the server safety. Failure to observe the
precautions may cause death or serious injury. For details, refer to Safety precautions in
Precautions for Use.
Be sure to observe the following precautions to use the server safely. Failure to observe the
precautions may cause burns, injury, and property damage. For details, refer to Safety
precautions in Precautions for Use.
78
Contact the maintenance engineer in your sales representative if you have any requests
on the system configuration including the connection to the uninterruptible power supply
system or auto power controller and the time schedule operation.
If you are installing the CPU blade in the Blade Enclosure (SIGMABLADE), follow
instructions described in the User's Guide of the Blade Enclosure.
WARNING
Do not hold the power plug with a wet hand.
Do not connect earth lines to any gas tubes.
Do not plug the power cord in to an improper power source.
Do not connect the power cord to an outlet that has an illegal number of connections.
Insert the power plug into the outlet as far as it goes.
Use the authorized power cord only.
Do not connect or disconnect any interface cable with the power cord of the server plugged
to a power source.
Do not use any unauthorized interface cable.
Express5800/B120d, B110d User's Guide
CAUTION
2. Installation and Connection