Remote Controller (Optional); Manual Operation - Canon ITS-ME Operation Manual

5 OPERATION
5-2. OPERATION FROM REMOTE CONTROLLER
Please purchase a remote contoroller, and extension cables if required.

REMOTE CONTROLLER (Optional)

The remote controller connects to this lens for allowing remote control operation.
TCR-101F
TCR-201F
TCR-301F
All models allow iris operation from the camera and switching of operations by the remote
controller.
EXTENSION CABLE (Optional)
This cable connects the remote control lens to the remote controller. Cables with the following
lengths are available.
TCC-05
TCC-10
TCC-20
TCC-50
TCC-100
NOTE
For the ITS-RE type lenses, extender operation is controlled by extender remote controller.
Prepare an extender remote controller and an extender control cable.

MANUAL OPERATION

ITS-ME, ITS-RE type lenses are designed for remote control operation, however manual operation
is enabled by setting the selecting switches shown in the above picture to "M" position.
Turn each operation ring manually to operate the lens when necessary.
This models allow manual remote control of the zoom, focus, and iris at any selected
speed.
This models allow manual remote position control of the zoom, focus,and iris.
This model also features manual remote control of the zoom, focus, and iris, and can
preset zooming and focusing for up to eight shots.
(The zoom and focus are considered as one set in eight shots.)
5 m extension cable
10 m extension cable
20 m extension cable
50 m extension cable
100 m extension cable
NOTE
Check before operating manually for back focus
Auto/Manual Focus
selecting switch
adjustment etc.
Auto/Manual Zoom
Before performing manual operation of remote control lenses, be
selecting switch
sure to set the Auto/Manual focus selecting switches to "M" position.
Auto/Manual Iris
If manual operation is forcibly performed with "A" position, the lens
selecting switch
may result in damages.
E18