Advertisement
Quick Links
5
Product reference
TRC321B
TRC321B
Shutters and blinds
control
Status indication
Summary
1. Presentation of the functions ............................................................................................................................................ 2
1.1 General points ............................................................................................................................................................. 2
1.2 Description of the product............................................................................................................................................ 2
1.3 Function Description.................................................................................................................................................... 3
2. Configuration and settings ................................................................................................................................................ 3
2.1 Objects List.................................................................................................................................................................. 3
2.2 Setting parameters ...................................................................................................................................................... 3
2.3 Configuration with media coupler (ETS version > 3.0f) ............................................................................................... 4
3. Factory reset ..................................................................................................................................................................... 6
4. Characteristics .................................................................................................................................................................. 6
TRC321B
Tebis application software
Electrical / Mechanical characteristics: see product user's instructions
Product designation
Luminosity detector RF
Media coupler
Gateway between the
RF products and the TP
products in a KNX
installation
Configuration and
parameter setting of
radio products by ETS
Transmission of radio
controls
Diagnosis
1
Luminosity detector RF quicklink
Application software ref.
STRC321B
Output modules
KNX
Loads connected
Visualisation
system
6T 8085-02a
Advertisement
Related Manuals for hager TRC321B
Summary of Contents for hager TRC321B
-
Page 1: Table Of Contents
Tebis application software Luminosity detector RF quicklink Electrical / Mechanical characteristics: see product user's instructions Product reference Product designation Application software ref. TRC321B Luminosity detector RF STRC321B Output modules TRC321B Media coupler Loads connected Gateway between the RF products and the TP... -
Page 2: Presentation Of The Functions
A button on the front of the product allows the user to interrupt automatic operation (no more radio transmissions except for the Status indication - Battery status object). The effect of this button can be inhibited by configuration, leading to permanent automatic function. TRC321B 6T 8085-02a... -
Page 3: Function Description
0 = Low level 1 = High level, (Batteries OK). Sent when new batteries are put in. No parameters. 2.2 Setting parameters The TRC321B luminosity detector only offers one parameter. Parameter Description Value This parameter defines utilization of the button on the front of the product. -
Page 4: Configuration With Media Coupler (Ets Version > 3.0F)
• Repeat this operation for the other radio transmitters. Caution: After an interruption in the above operations greater than 10 mn, it is necessary to press the cfg button again on the transmitter devices to be programmed. TRC321B 6T 8085-02a... - Page 5 To test the functions and the KNX radio communication, return to normal use mode and wait 15 s before pressing a control button on a transmitter. Caution: The media coupler plug-in must be deactivated during the functional tests. NB: For further information, please refer to the description of the media coupler application software. TRC321B 6T 8085-02a...
-
Page 6: Factory Reset
To reuse a product that has already been programmed in another installation by TX100 or quicklink , with ETS, it is necessary to perform a factory reset for the product. 4. Characteristics Product TRC321B Max. number of group addresses Max. number of links TRC321B... - Page 7 TRC321B 6T 8085-02a...