How To Use The Digital Monitor; And Its Controls - Hitachi HISCREW 2000 Series Instruction Manual

3. HOW TO OPERATE [How to Use Digital Monitor and its Controls]
3.2 How to Use the Digital Monitor and its Controls
(1) Displaying the Operating Hours, Pressure, Discharge Air Temperature,
Loading Rate, Total Loading Time, and Alarm or Shutdown Code
Dot: Indicates updating of the operating hours.
表示切替
SELECT
表示切替
SELECT
IMPORTANT
If you want to display the exact total loading
time (× 10), hold down the SELECT button
and press the RESET button.
(2) Displaying the Shutdown History
表示切替
Digital Monitor
SELECT
Hold down for more
than 7 seconds.
Hold down for more
than 3 seconds.
Hold down for more
than 3 seconds.
リ セ ッ ト
押す
RESET
Press to
return.
8
Operating Hours (× 10 h)
Press
P: Pressure in MPa (Unused.)
C: Discharge air temperature in Celsius
L: Loading rate in percent
Press for each new screen.
U: Total loading time (× 10,000)
E: Alarm/shutdown code
(Available only when an alarm/shutdown
problem has happened.)
運転管理
C ： 温度 TEMP
Newest shutdown
表示切替
SELECT
Second newest
shutdown
XX: Shutdown code
表示切替
SELECT
Oldest shutdown
表示切替
Hold down for more
than 3 seconds.
SELECT
F3 and the further numbers
Not to be used
by the users.
When you connect the power, the digital monitor displays the
total operating hours. To display other data, do as follows:
q Press the SELECT button. The screen displays "P0.00."
This screen is unused.
w Press the SELECT button. The screen displays "C"
together with the discharge air temperature.
e Press the SELECT button. The screen displays "L"
together with the loading rate. The system flushes
figures when in calculation.
r Press the SELECT button. The screen displays "U"
together with the total loading time (× 10,000).
Refer to the IMPORTANT.
t Press the SELECT button. When the alarm/shutdown
light is:
・ on (flashing), the screen displays "E" (flashing)
together with the alarm/shutdown code (
23-24). Press the SELECT button to return to the
original screen of total operating hours.
・ off, you directly return to the original screen of
total operating hours.
RUNNING CONTROL
警報 故障
ALARM SHUTDOWN
× 10h
Ｅ ： 故障コー ド ERROR CODE
リ セ ッ ト エコモー ド
RESET ECOMODE
表示切替 ドライヤー
SELECT DRYER
To display other data, do as follows:
q Hold down the SELECT button. The screen displays
"F0" together with the shutdown code (
The "0" indicates the newest shutdown.
w Press the SELECT button. The screen displays "F1"
together with the shutdown code. The "1" indicates the
second newest shutdown.
e Press the SELECT button. The screen displays "F2"
together with the shutdown code. The "2" indicates the
oldest shutdown.
r Press the RESET button. The screen returns to what
you have left with the action q above. If you press the
SELECT button instead, the screen displays "F3" (and
the further numbers) which are not to be used by the
users.
IMPORTANT
Displaying the "
downs are stored in the memory.
" in the action q indicates that no shut-
pp.
pp. 23-24).