Introduction; Emulation Components - Motorola M68EM05P18 User Manual

General Description

Introduction

Emulation Components

10

Introduction

Your M68EM05P18 gives your Motorola development tool the ability to
emulate target systems based on the MC68HC805P18 and
MC68HC05P18 microcontroller units (MCUs). By substituting a different
emulation module (EM), you can enable your Motorola development tool
to emulate other MCUs. Refer to Motorola's Development Tool Selector
Guide , order number SG173/D, for a complete list of available EMs.
This hardware user's manual explains connection, configuration, and
operation information specific to the M68EM05P18 emulation module.
The module can be installed in any of three Motorola development
systems. To configure your M68EM05P18 for use as part of an MMDS05
or an MMEVS05/MMEVS08, follow the instructions given in
MMDS/MMEVS Configuration and Operation on page 19. To
configure your M68EM05P18 for use as part of an HC05EVS, follow
instructions given in HC05EVS Configuration and Operation on page
31.
Motorola's complete emulation system consists of the emulation module
described in this manual as well as other separately purchased options
described in the following paragraphs.
These items are included with the M68EM05P18 emulation module:
• An M68EM05P18 emulation module (EM) — the printed circuit
board that enables system functionality for MC68HC805P18 and
MC68HC05P18 MCUs. The female connectors, on the bottom of
the module, mate with male connectors on a development system
platform board. The EM also has a connector for the target cable
assembly.
• Configuration software — 3 1/2-inch diskette containing
personality files for this module.
General Description
M68EM05P18UM/D
MOTOROLA