Customer Cost Information; Consumption Data; Meter Balance - Credit Mode; Cost Of Instantaneous Consumption - Honeywell AS302P Operating Instructions Manual

22
AS302P Single Phase Smart Meter
____________________________________________________________________

13. CUSTOMER COST INFORMATION

13.1. Consumption Data

The AS302P stores the following data for Daily, Weekly and Monthly Billing:
•
Import kWh
•
Estimated Cost for kWh Import
Daily Cost is calculated by taking the advance in each TOU or TOU Block Register and multiplying this by the Current
Price plus Standing Charge.
All values are calculated per second.
These values are stored at Midnight Local Time.
Historical Consumption and Cost of Consumption Estimate Reporting
Daily - Current Day and Previous 8 Days (Current day 00.00 to Present Time)
Weekly - Current Week and Previous 5 Weeks (00.00 Monday to 23.59.59 Sunday)
Month - Current Month and Previous 13 Months (00.00 First Day of Month to 23.59.59 Last Day of Month).
13.2. Meter Balance – Credit Mode
Meter Balance can be viewed on the display.
The Meter Balance is calculated using the following factors:
•
Energy usage * Price applicable at the time (based on TOU Rate or TOU Block Rate)
•
Standing Charge
-
The Meter Balance is updated every second.
The Meter Balance can be adjusted or set to zero on receipt of an appropriate command. An Event will be created in the
Event Log.

14. COST OF INSTANTANEOUS CONSUMPTION

The instantaneous cost of consumption is based on the Active Power Import and the current Active Tariff Price.
This is calculated at least every 5s.

15. POWER THRESHOLD STATUS

The AS302P has 2 configurable Ambient Power Thresholds, these are set for:
•
Low - Medium Power Threshold
•
Medium - High Power Threshold
These Thresholds are used to determine if the current consumption level is Low, Medium or High.
This information will be available for the Type 1 or Type 2 Devices.
© Honeywell - M450 001 1D - 23.05.2019
If the meter is Powered Down for a Period then all missed Standing Charges will be added when the
meter is next powered up.