Honeywell INTUVUE RDR-7000 Quick Start Manual page 9

6
TESTING
a. Ensure that all personnel are a safe distance from the radar.
b. Power up the radar.
c. Select TEST from the Controller or the Aircraft Maintenance System.
d. Confirm that the color test pattern is displayed on the radar display.
e. Allow approximately 60 seconds for TEST to finish.
f. Verify that no errors are reported by the technician at the Controller or the Aircraft
Maintenance System; any faults are displayed after the completion of the TEST
sequence.
g. Confirm that the correct equipment and software part numbers are displayed. If any
software part number is incorrect, refer to the installation manual for complete loading
instructions.
h. Close the radome and secure it.
i. Power down the radar.
Fig. 4. No Fault
Fig. 7. Part Number
Fig. 5. Fault Number
Fig. 8. Part Number
Fig. 6. Test Pattern
Fig. 9. Fault Number