Table of Contents
Advertisement
3 Using expansion features
Using an USB thumb drive
3
1
2
3
Using an USB thumb drive
1
2
3
1
2
3
22
Push the card into the slot using your finger until you feel the card lock and hear an
audible system sound. This indicates that the card is properly seated within the slot.
Removing an SD/MMC card
Hold your handheld securely.
Release the card from the slot by using your thumb to push against the top of the
card, as if you were pushing it further into the slot (a). An audible system sound and a
click will signal that the card has been released.
Gently remove the card from the slot (b).
Your Acer n300 supports USB host expansion. Via cradle or sync cable, you can access a
USB thumb drive directly from your n300.
Inserting an USB thumb drive - Through the Cradle
Connect the AC adapter cord to the DC-in jack at the back of the cradle.
Plug the AC adapter into any AC current outlet.
Insert the USB thumb drive into USB host port of Cradle.
Inserting an USB thumb drive - Through the 3-in-1 Sync
cable (optional accessory)
Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.
Plug the AC adapter into any AC current outlet.
Insert the USB thumb drive into USB host port of sync cable.
Hide quick links:
Advertisement
Table of Contents
