Installation Of Option Panels (Bkds-7030/7031/7033/7340) - Sony DVS-7200A Installation Manual

4-4-6. Installation of Option Panels (BKDS-7030/7031/7033/7340)

Contents of BKDS-7030
Key Frame Control Panel Unit (KY-328 board) : 1 pc
Harness (CTRL5)
Harness (DC9)
Screws (PSW3 x 8)
Contents of BKDS-7031
DME Control Panel Unit (KY-329 board) : 1 pc
Harness (CTRL5)
Harness (DC9)
Screw (PSW3 x 8)
Contents of BKDS-7033
Memory Recall Control Panel Unit (KY-395C board) : 1 pc
Harness (CTRL5)
Harness (DC9)
Screw (PSW3 x 8)
Contents of BKDS-7340
DSK Board/Control Panel Unit (KY-393 board) : 1 pc
Screw (PSW3 x 8)
n
After installing a track ball to BKDS-7031, install BKDS-7031 to the control panel.
(Refer to "4-4-5. Installation of BKDS-7031 Track Ball".)
1. Installation to Control Panel (BKDS-7015)
(1) Open the panel. (Refer to "4-4-1. Opening and Closing of Panel".)
(2) Turn off the power switches A and B in the control panel.
(Refer to "4-4-2. Turning On/Off the Power Switch".)
(3) Disconnect the three connectors (CN1 through CN3) on the CN-1509 board (blank panel) that is
installed the option panel.
(4) Remove the four screws (PWH3 x 8) and the blank panel in the direction of the arrow.
DVS-7200AE IM
: 1 pc
: 1 pc
: 4 pcs
: 1 pc
: 1 pc
: 4 pcs
: 1 pc
: 1 pc
: 4 pcs
: 4 pcs
4-4. Installation of Options for Control Panel
4-21